INTISI 7 E120 Fire curtains

The advanced technology employed in INTISI 7 E120 Fire curtains drastically improve their fire resistance, and with a thickness of just 0.65 mm they can limit the spread of fire and smoke up to temperatures of 1100ºC for 120 minutes.

Safety and efficiency

FIRE RATING

According to the standard
EN 13501-2

E120

FIRE RESISTANCE PERFORMANCE (FEATURES)

According to the standard
EN 1634-1

INTEGRITY (E)

Guaranteed to contain flames and hot gases on the side exposed to fire for 120 minutes up to 1100ºC, avoiding the appearance of:

  • Cracks or openings
  • Flames on the side not exposed to fire

SCOPE OF FIRE RESISTANCE CAPACITY

According to the standard EN 1634-1

Certified resistance to direct fire attack (test system with all components exposed to fire - headbox and side guides).

TEXTILE TECHNOLOGY IDEAL FOR COMPLIANCE

INTISI TEX-FPI

High-performance technical glass fibre fabric finished with an advanced stainless steel reinforcement to ensure INTEGRITY (E) of the system; and finish with an advanced polyurethane formula in order to conserve the properties inherent to the fabric during INTISI 7 fire curtain manouevres.

MAXIMUM DIMENSIONS

According to the standard EXAP EN 15269-11

22000 x 10000 mm (Width x Height) – On a single roll (without overlaps)

AUTOMATIC CLOSING

INTISI 7 E120 Fire curtains remain permanently open and only close in case of fire when an activation signal is sent for automatic closure in the event of fire.

AUTOMATIC CLOSING DURABILITY

According to the standard EN 14600

2350 continuous cycles without cooling stoppages tested with the largest curtain.

CLOSING EFFECTIVENESS

The ISF GRAVITY FAIL SAFE® technology guarantees closing by gravity at a controlled speed, even if main and auxiliary power are lost, either because of a general power supply fault or a wiring fault.

SAFETY

Any risk to personal injury from impact by the INTISI 7 fire curtain is eliminated thanks to the safe, controlled speed guaranteed under all conditions.

Advantages of the INTISI 7 E120 Fire curtains

ISF GRAVITY FAIL SAFE

Technology ISF GRAVITY FAIL SAFE® as standard

Intelligence

Intelligence in all components

Ultra compact

Ultra compact for complete integration in the building

Emergency

Emergency function for enhanced safety

Ultra size

Ultra size certified up to 22 metres wide and 10 metres high

Reversible

Reversible capable of withstanding direct attack from fire on both sides

One Click Assembly

One Click Assembly for fast, safe fitting

Anti-crushing

Anti-crushing avoids risks in any conditions

Specifications

Standard headbox

LIGHT SERIES. INTISI 7 E120 small size Fire curtains


The tubular axle is supported at one of both ends.
 


HEADBOX HEADBOX DIMENSIONS (PxC) MAXIMUM WIDTH (A) MAXIMUM HEIGHT (H)
Light compact 190x200mm 1,8m > A ≤ 6m 1m > H ≤ 3m
Light compact+ 236x290mm 3m > H ≤ 10m

Special dimensions on request

WIDE SERIES. INTISI 7 E120 large size Fire curtains on a single roll (without overlaps)


The tubular axle floats on a low friction, twin roller mechanism.


HEADBOX HEADBOX DIMENSIONS (PxC) MAXIMUM WIDTH (A) MAXIMUM HEIGHT (H)
Wide
compact+
236x290mm 6m > A ≤ 22m 1m > H ≤ 7m
Wide compactPRO 286x445mm 7m > H ≤ 10m

Special headbox

LIGHT SERIES. INTISI 7 E120 small size Fire curtains


The tubular axle is supported at one of both ends.
 


HEADBOX HEADBOX DIMENSIONS (PxC) MAXIMUM WIDTH (A) MAXIMUM HEIGHT (H)
Light compact INVERTER 190x200mm 1,8m > A ≤ 6m 1m > H ≤ 3m
Light compact+ INVERTER 236x290mm 3m > H ≤ 10m

Special dimensions on request

WIDE SERIES. INTISI 7 E120 large size Fire curtains on a single roll


The tubular axle floats on a low friction, twin roller mechanism.


HEADBOX HEADBOX DIMENSIONS (PxC) MAXIMUM WIDTH (A) MAXIMUM HEIGHT (H)
Wide
compact+ INVERTER
236x290mm 6m > A ≤ 22m 1m > H ≤ 7m
Wide compactPRO INVERTER 286x445mm 7m > H ≤ 10m

Installation alternatives

Wall installation Ceiling installation

Standard GL side guides

SIDE GUIDES INSTALLATION
ALTERNATIVES
DIMENSIONS
(G x F)
HEIGHT
(H)
AREA
(A x H)
GL130

Wall mounted

In the embrasure

130 x 74mm ≤ 7 m ≤ 70 m2
GL130e

Built-in

130 x 74mm ≤ 7 m ≤ 70 m2

Special GL side guides

SIDE GUIDES INSTALLATION
ALTERNATIVES
DIMENSIONS
(G x F)
HEIGHT
(H)
AREA
(A x H)
GL175

Wall mounted

175 x 105mm 7 m > H
≤ 10 m
70 m2 > H
≤ 120 m2

Options and accessories

Coatings

Housing, GL side guides, closure rail and embellisher, etc., available in any RAL

Stainless steel

Components (headbox, GL side guides, closure rail and embellisher) in stainless steel.

Heat detector

Smoke detector
Alarm button
Optical flash

Warning that the INTISI 7 fire curtain is moving or in operation position.


Sound warning

Warning that the INTISI 7 fire curtain is moving or in operation position.

ETE130 embellisher

Accessory to regulate any possible irregularities on false ceilings up to 20 mm thanks to the elastic, self-regulating device with stainless steel finish.

Push button

For emergency opening function for a programmed time.