The innovative design of INTISI 7 EW120 fire curtains allows limiting and controlling flames and hot gases up to 1100ºC, and creating an area where the thermal radiation is reduced to 15Kw/m2 for 120 minutes, thus ensuring there are safe zones during the fire.
According to the standard EN 13501-2
According to the standard EN 1634-1
Guaranteed to contain flames and hot gases on the side exposed to fire for 120 minutes up to 1100ºC, avoiding the appearance of:
Limits the transfer of thermal radiation up to 15Kw/m2, preventing ignition of materials and damage to persons on the side not exposed to fire.
According to the standard EN 1634-1
Certified resistance to direct fire attack (test system with all components exposed to fire - headbox and side guides).
Multi-layer, high performance fabric made from glass fibre reinforced with stainless steel and finished with aluminum laminate on both sides, capable of creating an interior insulating layer when exposed to high temperatures, and reflecting heat, thus limiting thermal radiation transmission under 15 kW/m2 for 2 hours.
According to the standard EXAP EN 15269-11
15000 x 5500 mm (Width x Height) – On a single roll (without overlaps)
INTISI 7 EW120 Fire curtains remain permanently open and only close in case of fire when an activation signal is sent for automatic closure in the event of fire.
According to the standard EN 14600
500 continuous cycles without cooling stoppages tested with the largest curtain.
The ISF GRAVITY FAIL SAFE® technology guarantees closing by gravity at a controlled speed, even if main and auxiliary power are lost, either because of a general power supply fault or a wiring fault.
Any risk to personal injury from impact by the INTISI 7 fire curtain is eliminated thanks to the safe, controlled speed guaranteed under all conditions.
Technology ISF GRAVITY FAIL SAFE® as standard
Intelligence in all components
Ultra compact for complete integration in the building
Emergency function for enhanced safety
Ultra size certified up to 15 metres wide and 5.5 metres high
Reversible capable of withstanding direct attack from fire on both sides
One Click Assembly for fast, safe fitting
Anti-crushing avoids risks in any conditions
The tubular axle is supported at one of both ends.
| HOUSING | HOUSING DIMENSIONS (PxC) | MAXIMUM WIDTH (A) | MAXIMUM HEIGHT (H) |
|---|---|---|---|
| Light compact | 190x200mm | 1,8m > A ≤ 6m | 1 m > H ≤ 1,8 m |
| Light compact+ | 236x290mm | 1,8 m > H ≤ 5 m |
Special dimensions on request
The tubular axle floats on a low friction, twin roller mechanism.
| HOUSING | HOUSING DIMENSIONS (PxC) | MAXIMUM WIDTH (A) | MAXIMUM HEIGHT (H) |
|---|---|---|---|
| Wide compact+ |
236x290mm | 6 m > A ≤ 15 m | 1m > H ≤ 4m |
| Wide compactPRO | 286x445mm | 4 m > H ≤ 5,5 m |
The tubular axle is supported at one of both ends.
| HOUSING | HOUSING DIMENSIONS (PxC) | MAXIMUM WIDTH (A) | MAXIMUM HEIGHT (H) |
|---|---|---|---|
| Light compact INVERTER | 190x200mm | 1,8m > A ≤ 6m | 1 m > H ≤ 1,8 m |
| Light compact+ INVERTER | 236x290mm | 1,8 m > H ≤ 5 m |
The tubular axle floats on a low friction, twin roller mechanism.
| HOUSING | HOUSING DIMENSIONS (PxC) | MAXIMUM WIDTH (A) | MAXIMUM HEIGHT (H) |
|---|---|---|---|
| Wide compact+ INVERTER |
236x290mm | 6 m > A ≤ 15 m | 1 m > H ≤ 4 m |
| Wide compactPRO INVERTER | 286x445mm | 4 m > H ≤ 5,5 m |
| Wall installation | Ceiling installation |
|---|---|
 |
 |
| SIDE GUIDES | INSTALLATION ALTERNATIVES |
DIMENSIONS (G x F) |
HEIGHT (H) |
AREA (A x H) |
|
|---|---|---|---|---|---|
| GL130 | Wall mounted 
In the embrasure  |
130 x 74mm | ≤ 4 m | ≤ 60 m2 |  |
| GL130e | Built-in 
|
130 x 74mm | ≤ 4 m | ≤ 60 m2 |
| SIDE GUIDES | INSTALLATION ALTERNATIVES |
DIMENSIONS (G x F) |
HEIGHT (H) |
AREA (A x H) |
|
|---|---|---|---|---|---|
| GL175 | Wall mounted
|
175 x 105mm | 4 m > H ≤ 5,5 m |
60 m2 > H ≤ 75 m2 |
|
Housing, GL side guides, closure rail and embellisher, etc., available in any RAL
Components (headbox, GL side guides, closure rail and embellisher) in stainless steel.
Warning that the INTISI 7 fire curtain is moving or in operation position.
Warning that the INTISI 7 fire curtain is moving or in operation position.
Accessory to regulate any possible irregularities on false ceilings up to 20 mm thanks to the elastic, self-regulating device with stainless steel finish.
For emergency opening function for a programmed time.
